$495.00

Gen-3+ Pro-Plus "No-QD" Oil Lines
[Years: 03-17]

Gen-3+ Pro-Plus \"No-QD\" Oil Lines
Now available due to demand!

[Note: Pictures is incorrect and shows 2-connect, will be updated when I get time]

NO QUICK DISCONNECT VERSION. All the benefits of Pro-Plus, without the cost of disconnects. Replacement for our discontinued standard Stainless Braided oil lines.

These are FULL FLOW, they have no valves, and no restrictions. They flow far better than OEM lines and adapters, anyone who has a Gen-3 or later car with a few miles on it surely knows how annoying the factory lines can be as they slowly seep oil all over the place... and that's a best case scenario. We have seen more than one that decided to disconnect itself or fail catastrophically, and cost the owner an engine.

So far as materials, these oil lines are the "Upper-Mid-Tier" offering by this manufacturer, but are still better than anything made by competitors, and are the latest technology available. The base hose is Pro-Plus with a Silicone cover, which is a 3-layer type hose. It is a convoluted smooth-bore Teflon hose, wrapped in an Aramid weave, and then covered in a molded Silicone layer. They are very light weight, do not permeate odors or fluids, very flexible, and quite abrasion resistant. All ends are Crimp type, and are black anodized and Super-Nickel. The direct port ORB hose ends eliminate the use of any separate JIC adapters.

Note: When comparing HS79-CSM and Pro-Plus hoses, they both are the very top-shelf of product offerings. HS79-CSM is more abrasion resistant and has a very visually appealing appearance, slightly more flexible, slightly higher flow rate, and has a slightly higher temperature rating. Pro-Plus however is more reasonably priced, still more than adequate for the applications, and of course far superior to OEM components. One benefit of Pro-Plus is that a given hose size/flow rate will be smaller in total outer diameter than a comparable line of other types. A -10 sized Pro-Plus hose will be roughly the same external diameter as a -8 sized HS79, Aeroquip, or other standard size hose offering. This helps in space limited applications, and is due to the fact that Pro-Plus uses a constant ID on fittings and lines with the use of press-fit and crimped hose ends, rather than slip-fit oversized hoses in other applications where the hose ID is larger than the fitting ID.

Please select Model Year below.

Reviews
Categories
Forced Induction-> (78)
Engine Parts-> (76)
  Appearance (5)
  Blocks & Internals (17)
  Cooling (1)
  Exhaust (7)
  Fuel (10)
  Gaskets (11)
  Heads & Valvetrain (12)
  Ignition (4)
  Intake (3)
  Oiling (6)
Electronics-> (26)
Drivetrain-> (7)
Braking-> (7)
Accessories-> (17)
Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
0 items
Manufacturer Info
VSP
Other products
Share Product
Share via E-Mail Share on Facebook
Contact Us!